Weber re-invents the KSF series

With Weber’s unique ‘CBF Motion Control’, in just one pass, wave, zigzag, segment and line patterns can be sanded into all woods and wood-based materials.

Germany-based Hans Weber Maschinenfabrik, which has 10 decades of expertise in grinding and sanding machines, recently re-launched its KSF series, which can be fitted out with up to eight sanding stations.

This machine series is ideal for fast and efficient wood, veneer and lacquer sanding. All sanding and brushing stations can be installed in any random order.

Examples are the cross-belt station and the wide-belt stations, such as the contact drum, combination station and wide belt with sanding pads, and of course also the Weber CBF sanding technology, X-Schliff and the patented Weber brush technology.

The Weber KSF sanding lines work with direct work piece transfer integrated into lines or as a stand-alone installation. The design and construction of the new KSF series meets the CE standards for the safety of machinery.

This series also features self-learning tracking. After each change of the sanding belt, it automatically returns to the centre oscillation position.

A “standing sanding belt” is optionally available as well. The cross belt unit has been optimised to ensure to ensure even better sanding of the edges and more homogeneous belt tension.

Weber’s new Creativ Schliff (creative sanding) unique add-on package enables companies to create their own, individual sanding patterns. The blade is developed and patented especially by Weber, the necessary software programming, and the relevant training.

The pressure pieces can be applied to the blade individually and in any random order in order to achieve unique and individual surface patterns.

The package can also be easily retrofitted to existing Weber sander machines from the KSL, KSF, KSN and KSN compact.

Another innovation Weber has presented is the ‘CBF Motion Control’ wherein, by using specific software, the unit can switch from fine sanding to effect sanding mode at the touch of a button.

In just one pass, wave, zigzag, segment and line patterns in the grit range of 40-150 can be sanded into all woods and wood-based materials.

A retrofit is carried out as a complete package and includes unit conversion, software update and training the operating personnel by an application engineer. For more information, write to



Comment here