State-of-art machines from the Jai stable

Jai Industries offer an unparalleled array of products that include woodworking and panel processing machinery and electric motors. It is well known for its engineering quality, technology and innovation.

Its range of machines are products of R&D backed, high-end precision engineering and have the best possible features and are made of the topmost quality material and component. All the products are backed by dedicated service and guidance.

Jai currently manufactures 30,000 machines a year in its seven plants that have a total floor area of 4, 00,000 square feet. Its machines are specifically produced to suit Indian working conditions.

Panel Saw (2.0)

The machine is suitable to cut the panel board to required measurements from 8x4 feet or 9x6 feet sheet. It is suitable to cut all kind of chip-free laminated chipboards and MDF, HDF and panels. Panel saw of maximum strength and rigidity with value-added features.

Salient Features

•         Heavy-duty, precision-sliding table with linear bearing developed with advanced technology with multi-chamber system for maximum rigidity of the double roller carriage

•         Sturdily built, heavy-duty machine that suits Indian working condition for precise, burr free cutting

•         Lifting and tilting of saw unit by hand wheels, positioned at the front for more convenience

•         Scoring saw, precision lever mechanism for manual adjustment and controls

•         Electronic digital readout of saw unit tilt

•         Anodized aluminum rip fence with sliding system on heavy, round bar for parallel cutting up to 1250mm.Fine setting mechanism allows for precise measurements for parallel cuts

•         Easy and fast saw-scoring blades changing. Also, entire saw unit on heavy duty, cast-iron trunnion.

•         Saw unit vertical movement on precise, round guides ensures smooth operation. Its closed structure guarantees high rigidity that is vibration free.

•         The sturdy frame provides a rigid support for cutting, with telescopic cross-cut fence. Also, panels to be squared and cuts an angle up to 45° (Semi-Auto Curvilinear Edge Bander)

Edge banders are mainly required for producing straight panels and these advanced, tech-heavy duty machines suit Indian working conditions. It gives precise application of linear or straight edge banding and round cornering for materials like veneer, melamine, PVC or ABS.

It is the most efficient entry-level edge-bander the panel industry can get in this category and all basic edge-banding work can be done on it. It has Euro standard features like optimal and consistent glue-spreading, heat bonding and pneumatic edge-cutting.

Salient Features

•         Pneumatic cutting device for pre-defined length, with foot switch

•         Electronic digital millimeter counter to adjust the length

•         Double glue rollers in gluing device

•         Easy regulation for 2-speed

•         Revolving edge coil holder plate 525 mm Ø

•         Electronic, digital temperature controller with safety circuit, which allows starting of the motor only when the hot glue has reached the set temperature

•         Working M.S. table with specially designed hylum strips for heat insulation and frictionless movement of work-piece (Auto) Edge Bander

This machine is incorporated with the ultimate, high-end advanced technology with highest features and is made available at an unbeatable price.

Salient Features

•         Sturdily built, heavy-duty machine to suit Indian working condition for precise application of edge banding material

•         Innovative, pre-melting, sensor-operated, Teflon-coated glue tank having a glue drop system, which consumes less glue compared to other edge banders resulting in increased profits

•         High-frequency, compact motors sliding on a prismatic guide ways for perfect finishing with trouble free performance

•         Automatic lowering of the glue temperature after a temporary non-use of the machine                                                                                                                                        

•         Edging wooden strip of up to 12mm

•         High-performance machine with feeding speed of 12 m/min that gives more production for PVC/ABS & 6 m/min for wooden strip

•         Motorized up-down movement of pressure beam for easy thickness setting 

•         Scraping unit with an extraction hood complete with a suitable container and filter for long chips

•         All electronic & pneumatic parts are from well-known international brands

•         Overall Meter Run (OMR) of edge band tape is displayed in PLC

•         Project Meter Run (PMR) is to calculate total usage of edge band tape in a particular project

•         Low maintenance machine, easy available cost effective spares, best service support. (Semi-Auto) Triple Head Multi Boring Machine 

This is a semi-automatic boring machine equipped with a horizontal and  two rotating vertical boring heads (0-900) with 21 spindles for executing holes in a line for the wardrobe side processing

The two vertical heads can slide away from each other depending on the center distance required between them. They also rotate by 90° giving more location positioning.  A digital counter is available for adjusting boring depth. The aluminum fence has 4 reference stops that slide on support rollers for smooth positioning, making it easy to feed a long work piece. Boring depth adjustment and setting of horizontal boring head is easy and quick. An auxiliary support frame gives better solution for long panels.

Models are available in single and double head. Spindle Moulder with sliding & tilting facility

The machine is used to give form to the edges of materials such as chipboard, MDF panels or boards. It is mainly required for preparing moulding and making profiles like bull nose, duck nose, half round for post forming.

Salient Features

•         A side ripfence of aluminum, which is adjustable

•         Ground and electronically balanced spindle for vibration-free operation

•         Easy and convenient system for locking of spindle shaft

•         Spindle driven by motors through V - belts and are housed in sealed bearings; thus ensuring minimum maintenance

•         2 - Spindle speeds 6000 / 8000 RPM for selection depending on tool diameter.

•         Dust chute is provided on fence assembly for dust evacuation

An optional Auto feeder AF-38 for auto feeding of work piece is also available. Auto feeding of the work piece improves production, reduces cost and results in better finishing with accuracy and safety.



Add Comment


FlexSlider 2