High-precision veneer splicing by Kuper

The Kuper FLI-1000 effectively combines innovation and technology and   is today the  best seller among the veneer splicing machines from the Kuper stable.

It uses a proven heat supply method, simultaneous application of contact pressure and precise guidance of material, connected with an intelligent energy management to enable high efficiency.

The sensitive control panel, which can also be easily operated with gloves, displays all parameters and considerably reduces the machine start-up time.

The innovative glue system ensures precise application to each veneer thickness.

The performance range of the machine is additionally extended by an optionally available compact cooling unit, which prolongs the glue pot life essentially or by the option packets for processing micro and thick veneers. The feeding speed is increased when processing pre-glued veneers.

The Kuper FLI-1000 works with a high efficiency heating system. It is equipped with an intelligent energy management system, and an innovative veneer infeed device.

Special features

•   All parameters required for machine operation can be easily set and stored through control panel.

•   A remarkable feature of the glue application system is the nearly horizontally arranged application disc. This allows precise glue application and excludes glue emerging from joints.

•   The proven and patented sliding rail system allows the use of high efficiency  plastic chains. These chains are completely maintenance-free and require no lubrication.

•   Stains resulting from a combination of condensate and metal abrasion is excluded.

•   The narrow heating zone ensures sensitive veneers are protected and veneer shrinking is considerably reduced.

Optional features

The new, directly integrated glue pot cooling unit ensures optimum production conditions and a long pot life and does not use cooling liquid. The required temperature can be adjusted on the control panel.

The optionally available packet for micro veneers allows joining veneers from a thickness of 0.25 mm. Special components ensure clean processing.

It also processes a veneer thickness of up to approx. 5 mm with additional equipment. The option packet contains all components required for precise processing of a veneer thickness from 1.5 mm.

 

Comments

 



Add Comment